EK800V2

The EK Series is the result of an in depth study, in order to reach the best compromise between economy and performance, taking advantage of the latest improvements in automated mixed surface mount and through whole electronic assembly.

The EK Series is a project based on an upside down mono-block approach offering an all-in-one power module that contains the entire amplifier assembly.

Simplicity and effectiveness run hand by hand through the entire design to obtain an effectively skilled and workable product.

The last generation Quanta-Pulse switching power supply reaches a new level of refined sensing and control of the power flow.

The cost-effective EK Series amplifiers are packed with solid and convincing arguments for the professionals searching for quality, reliability and value.

OUTPUT POWER 20Hz-20kHz, 0.1% THD
@2 Ω	@4 Ω	@8 Ω	Bridge @4 Ω	Bridge @8 Ω
2 x 500 W	2 x 400 W	2 x 240 W	1000 W	800 W

Output Power Continuous Average Power RMS, 1kHz, 1.0% THD+N		Intermodulation Distortion
@2 Ω	2 x 500 W	SMPTE	<0.05%
@4 Ω	2 x 400 W	Crosstalk
@8 Ω	2 x 240 W	20Hz-20kHz	> 75dB
Bridge @4 Ω	1000 W	Voltage Gain	35 dB
Bridge @8 Ω	800 W	Sensitivity
		Rated Power	0.8 V
High-Z		Signal-to-Noise-Ratio
70Vrms/100Vpeak	1 x 900 W	20Hz-20kHz	101dBA
100Vrms/140Vpeak	-	Pink Noise	12dB Crest Factor
Frequency Response		Required AC Mains 170V-265V AC - Operating Voltage (50Hz-60Hz)
Power Bandwidth ±0.25dB	20Hz-20kHz.	Power On Idling (@230 V	0.5 A
Phase Response		@4 Ω (1/8 rated power)	3.5 A
@ 1 watt 20Hz-20kHz	±15 deg	Dimensions
Total Harmonic Distortion		W x H x D (mm)	483 x 88.9 x 254
20Hz-20kHz	<0,05%	W x H x D (inches)	19 x 3.5 x 10
Damping Factor		Weight
20Hz-500Hz @8 Ω	>500	Net	5 kg

As powerful as being there.

EK800V2